Crack Filler

‣100% solids, 2-component epoxy formulation
‣Long working time (30–40 minutes)
‣High compressive strength (8,700 psi)
‣Excellent adhesion to various substrates (concrete, wood, metal, etc.)
‣VOC <50 g/L – LEED v4 and CFIA/USDA compliant

Remove dust, dirt, grease, oil, and all other contaminants with proper cleaner/degreaser. Prepare the surface mechanically as per ICRI-CSP2 profile by diamond grinding to ensure removal of laitance, curing agents and sealers. The compressive strength of a newly poured concrete substrate must be at least 25 MPA (3635 psi) after 28 days of cure and at least 1.5 MPA (218 psi) tensile strength. Be careful with condensation (at least 3 degrees of the dew point).

‣Fast curing (foot traffic ~6–8 hours @ 20°C)
‣100% solids, paste-like consistency
‣Excellent adhesion across multiple substrates
‣ High compressive (8,700 psi) and tensile (6,500 psi) strength
‣ VOC <50 g/L

Remove dust, dirt, grease, oil, and all other contaminants with proper cleaner/degreaser. Prepare the surface mechanically as per ICRI-CSP2 profile by diamond grinding to ensure removal of laitance, curing agents and sealers. The compressive strength of a newly poured concrete substrate must be at least 25 MPA (3635 psi) after 28 days of cure and at least 1.5 MPA (218 psi) tensile strength. Be careful with condensation (at least 3 degrees above the dew point).

‣Extremely rapid set time (5–10 minutes)
‣100% solids, 2-component epoxy
‣High tensile strength (6,500 psi) and compressive strength (8,700 psi)
‣Coverage: 1,100 linear ft/gal (1/8″ x 1/8″ cracks)
‣VOC <50 g/L

Remove dust, dirt, grease, oil, and all other contaminants with proper cleaner/degreaser. Prepare the surface mechanically as per ICRI-CSP2 profile by diamond grinding to ensure removal of laitance, curing agents and sealers. The compressive strength of a newly poured concrete substrate must be at least 25 MPA (3635 psi) after 28 days of cure and at least 1.5 MPA (218 psi) tensile strength. Be careful with condensation (at least 3 degrees above the dew point).

‣100% solids, vapor-resistant epoxy crack filler
‣Super-fast curing (5–10 minutes)
‣Water vapor permeability rating: 0.06 g/m²·24hr·mmHg (ASTM E96)
‣High flexural strength (15,000 psi) and compressive strength (8,200 psi)
‣Designed to be used with moisture mitigation systems

Remove dust, dirt, grease, oil, and all other contaminants with proper cleaner/degreaser. Prepare the surface mechanically as per ICRI-CSP2 profile by diamond grinding to ensure removal of laitance, curing agents and sealers. The compressive strength of a newly poured concrete substrate must be at least 25 MPA (3635 psi) after 28 days of cure and at least 1.5 MPA (218 psi) tensile strength.

Polyurea Formula – 2-component crack filler with ultra-fast cure.
Rapid Return to Service – Traffic-ready in 30 minutes at room temperature
Cold Temperature Application – Can be applied down to -20°C (-4°F)
Extremely Low Viscosity – 50–100 cps for deep penetration
VOC Free – 0 g/L, environmentally compliant

Remove dust, dirt, grease, oil, and all other contaminants with proper cleaner/degreaser. Prepare the surface mechanically as per ICRI-CSP2 profile by diamond grinding to ensure removal of laitance, curing agents and sealers. The compressive strength of a newly poured concrete substrate must be at least 25 MPA (3635 psi) after 28 days of cure and at least 1.5 MPA (218 psi) tensile strength.

Single-Component Moisture-Cure Formula
No mixing required—ready to use.
High Flexibility and Elongation
500% elongation; adapts to substrate movement and thermal expansion.
Durable and Elastic
Medium-to-high modulus with strong mechanical resistance and tear strength (10 N/mm).
Excellent Adhesion
Bonds to a wide range of substrates: concrete, wood, tile, glass, PVC, metal, and more.
Weather and Chemical Resistance
Withstands -40°C to +80°C temperatures, water immersion, salt spray, and light chemicals.
Manual or Pneumatic Application
Easy to apply using standard caulking guns.
Non-sag and Low Shrinkage
No slump after application (ISO 7390) and <10% volume loss (ISO 10563).
UV Resistant (Moderate)
Suitable for outdoor use; slight discoloration possible over time.

Remove dust, dirt, grease, oil, and all other contaminants with proper cleaner/degreaser.